Product Care
Battery Care Guide
General Cleaning
Approved Cleaning Ingredients
Newland recommends using an approved pre-moistened disinfecting wipe or a cleaning solution applied to a clean cloth. The active ingredients in your cleaner of choice must consist of one or some combination of the following:
- Isopropyl Alcohol (70% or above)
- Bleach/sodium hypochlorite (8.25% solution)*
- Hydrogen Peroxide
- Ammonium Chloride
- Mild dish soap
Harmful Ingredients
Ingredients known to damage the plastics on the device include but are not limited to: acetone; ketones; ethers; aromatic and chlorinated hydrocarbons; aqueous or alcoholic alkaline solutions; ethanola-mine; toluene; trichloroethylene; benzene; carbolic acid and TB-lysoform.
Recommended Cleaning Materials
- Alcohol wipes
- A soft clean / sterile cloth to which to apply the cleaning liquid
- Cleaning ingredients of choice
- Cotton-tipped applicators
- Can of compressed air
- Lens tissue
General Cleaning Instructions
Avoid applying liquid directly onto the device. Instead, dampen a soft clean or sterile cloth or use premoistoned wipes. Gently wipe the unit and be careful not to let liquid pool around the display window or other crevices. Allow the unit to air dry before use.
Cleaning Frequency
The frequency at which to clean Newland devices is at the customers discretion. It should be based on the environment and operation the device is used in. The device may be cleaned as frequently as required. Regular cleaning is recommended to avoid build up of dirt that makes the device more difficult to clean later on. For optimum image capture, it is recommended to clean the camera window periodically.
* When using sodium hypochlorite (bleach) based products, carefully follow the manufacturer’s recommended instructions, amongst which the use of gloves and the removal of residue afterwards with a damp alcohol cloth or cotton swab. Newland recommends avoiding exposure of this chemical to metal surfaces, to prevent oxidization. If the disinfectant does come in contact with a metal surface, it should be immediately removed with an alcohol-dampened cloth or cotton swab.
How should I clean my device?
Always follow your organization’s hygiene protocols and the instructions of the manufacturer of the disinfectant of your choice.
- Turn off the mobile computer.
- For thorough cleaning, Newland recommends to first remove all accessory attachments from the mobile device and clean them separately.
- Use a disinfectant wipe OR a soft clean / sterile cloth with your liquid solution applied to it. Wring out excess liquid.
- Wipe all surfaces of the mobile computer (and its accessories). Avoid any excess liquid pooling on the device. When using bleach, avoid connectors and all metal surface.
- Wipe off the scanner window, camera lens, and flash area with lens tissue.
- Dry the device with a dry sterile cloth.
- Use a cotton-tipped applicator to clean any crevices, such as around the buttons.
- Allow the device to fully air dry before turning on the power or placing it in a charger.
How should I clean my device?
Always follow your organization’s hygiene protocols and the instructions of the manufacturer of the disinfectant of your choice.
- Unplug and turn off the scanner.
- Use a disinfectant wipe OR a soft clean / sterile cloth with your liquid solution applied to it. Wring out excess liquid.
- Wipe all surfaces of the scanner (and its accessories) except the scanner window. Avoid any excess liquid pooling near the scanner window, trigger or cables.
- Clean the scanner window with a lint-free cloth or lens tissue. Dampen the cloth with water or a mild soapy water solution. If soap is used, rinse with a clean lens tissue dampened with water only.
- Dry the device with a dry sterile cloth.
- Use a cotton-tipped applicator to clean any crevices.
- Allow the device to fully air dry before turning on the power or placing it in a cradle.
Periodic Maintenance
Scanner Window
Regularly wipe the scanner window with lens tissue or other material suitable for cleaning optical materials such as eye glasses to ensure a consistent and optimal scanning performance.
Charging Contacts
- Dip the cotton portion of a cotton-tipped applicator in isopropyl alcohol.
- Gentry rub the applicator back and forth across the connector contacts
- Use a dry cotton-tipped applicator to rub across the connector contacts
- Ensure no further residue remains and let air dry
Newland cannot be held accountable for any damages resulting from wrongful cleaning or handling of devices.
Download the PDF
Download the full Guidelines on cleaning & disinfecting your Newland devices here.
More information?
Feel free to reach out for additional information or support.